Pulse-echo ultrasound method for detection of post-menopausal women with osteoporotic BMD.

We lack effective diagnostics of osteoporosis at the primary health care level. An ultrasound device was used to identify subjects in the osteoporotic range as defined by DXA. A case finding strategy combining ultrasound results with DXA measurements for patients with intermediate ultrasound results is presented. INTRODUCTION: We lack effective screening and diagnostics of osteoporosis at primary health care. In this study, a pulse-echo ultrasound (US) method is investigated for osteoporosis screening. METHODS: A total of 1091 Caucasian women (aged 50-80 years) were recruited for the study and measured with US in the tibia and radius. This method measures cortical thickness and provides an estimate of bone mineral density (BMD) and density index (DI). BMD assessment of the hip was available for 988 women. A total of 888 women had one or more risk factors for osteoporosis (OP susp ), and 100 women were classified healthy. Previously determined thresholds for the DI were evaluated for assessment of efficacy of the technique to detect hip BMD at osteoporotic range (T-score at or below - 2.5). RESULTS: In the OP susp group, the application of thresholds for the DI showed that approximately 32% of the subjects would require an additional DXA measurement. The multi-site ultrasound (US) measurement-based DI showed 93.7% sensitivity and 81.6% specificity, whereas the corresponding values for single-site US measurement-based DI were 84.7 and 82.0%, respectively. The ultrasound measurements showed a high negative predictive value 97.7 to 99.2% in every age decade examined (ages 50-59, 60-69, 70-79 years). CONCLUSIONS: The study data demonstrate that a strategy of combining ultrasound measurement with added DXA measurements in cases with intermediate ultrasound results (about 30%) can be useful for identifying subjects at risk for a low bone mineral density in the osteoporotic range.

Prediction of hip osteoporosis by DXA using a novel pulse-echo ultrasound device.

Pulse-echo ultrasonometry can be used as a pre-screen for hip osteoporosis before dual-energy x-ray absorptiometry (DXA), potentially allowing DXA to be avoided for the majority of post-menopausal women. Pulse-echo ultrasound measures of tibia cortical thickness are also associated with radiographically confirmed prior fractures, independent of femoral neck bone mineral density. INTRODUCTION: To estimate how well a pulse-echo ultrasound device discriminates those who have from those who do not have hip osteoporosis (femoral neck bone mineral density [BMD] or total hip BMD T-score ≤ -2.5), and to estimate the association of pulse-echo ultrasound measures with prevalent (radiographically confirmed) clinical fractures. METHODS: Five hundred fifty-five post-menopausal women age 50 to 89 had femoral neck and total hip BMD measured by dual-energy x-ray absorptiometry (DXA), and pulse-echo ultrasound measures of distal radius, proximal tibia, distal tibia cortical thickness, and multi- and single-site density indices (DI). Using previously published threshold ultrasound values, we estimated the proportion of women who would avoid a follow-up DXA after pulse-echo ultrasonometry, and the sensitivity and specificity of this for the detection of hip osteoporosis. Logistic regression models were used to estimate the associations of pulse-echo ultrasound measures with radiographically confirmed clinical fractures within the prior 5 years. RESULTS: Using multi-site and single-site DI measures, follow-up DXA could be avoided for 73 and 69 % of individuals, respectively, while detecting hip osteoporosis with 80-82 % sensitivity and 81 % specificity. Radiographically confirmed prior fracture was associated with ultrasound measures of single-site DI (odds ratio (OR) 1.55, 95 % confidence interval (CI). 1.06 to 2.26) and proximal tibia cortical thickness (OR 1.47, 95 % CI 1.10 to 1.96), adjusted for age, body mass index, and femoral neck BMD. CONCLUSIONS: Pulse-echo ultrasonometry can be used as an initial screening test for hip osteoporosis. Prospective studies of how well pulse-echo ultrasound measures predict subsequent clinical fractures are warranted.

New method for point-of-care osteoporosis screening and diagnostics.

SUMMARY: Due to the lack of diagnostics in primary health care, over 75% of osteoporotic patients are not diagnosed. A new ultrasound method for primary health care is proposed. Results suggest applicability of ultrasound method for osteoporosis diagnostics at primary health care. INTRODUCTION: We lack effective screening and diagnostics of osteoporosis at primary health care. In this study, a new ultrasound (US) method is proposed for osteoporosis diagnostics. METHODS: A total of 572 Caucasian women (age 20 to 91 years) were examined using pulse-echo US measurements in the tibia and radius. This method provides an estimate of bone mineral density (BMD), i.e. density index (DI). Areal BMD measurements at the femoral neck (BMD(neck)) and total hip (BMD(total)) were determined by using axial dual-energy X-ray absorptiometry (DXA) for women older than 50 years of age (n = 445, age = 68.8 ± 8.5 years). The osteoporosis thresholds for the DI were determined according to the International Society for Clinical Densitometry (ISCD). Finally, the FRAX questionnaire was completed by 425 participants. RESULTS: Osteoporosis was diagnosed in individuals with a T-score -2.5 or less in the total hip or femoral neck (n = 75). By using the ISCD approach for the DI, only 28.7% of the subjects were found to require an additional DXA measurement. Our results suggest that combination of US measurement and FRAX in osteoporosis management pathways would decrease the number of DXA measurements to 16% and the same treatment decisions would be reached at 85.4% sensitivity and 78.5% specificity levels. CONCLUSIONS: The present results demonstrate a significant correlation between the ultrasound and DXA measurements at the proximal femur. The thresholds presented here with the application to current osteoporosis management pathways show promise for the technique to significantly decrease the amount of DXA referrals and increase diagnostic coverage; however, these results need to be confirmed in future studies.

Ultrasound backscatter measurements of intact human proximal femurs--relationships of ultrasound parameters with tissue structure and mineral density.

Ultrasound reflection and backscatter parameters are related to the mechanical and structural properties of bone in vitro. However, the potential of ultrasound reflection and backscatter measurements has not been tested with intact human proximal femurs ex vivo. We hypothesize that ultrasound backscatter can be measured from intact femurs and that the measured backscattered signal is associated with cadaver age, bone mineral density (BMD) and trabecular bone microstructure. In this study, human femoral bones of 16 male cadavers (47.0±16.1 years, range: 21-77 years) were investigated using pulse-echo ultrasound measurements at the femoral neck in the antero-posterior direction and at the trochanter major in the anteroposterior and lateromedial directions. Recently introduced ultrasound backscatter parameters, independent of cortical thickness, e.g., time slope of apparent integrated backscatter (TSAB) and mean of the backscatter difference technique (MBD) were obtained and compared with the structural properties of trabecular bone samples, extracted from the locations of ultrasound measurements. Moreover, more conventional backscatter parameters, e.g., apparent integrated backscatter (AIB) and frequency slope of apparent integrated backscatter (FSAB) were analyzed. Bone mineral density of the intact femurs was evaluated using dual energy X-ray absorptiometry (DXA). AIB and MDB measured from the femoral neck correlated significantly (p<0.01) with the neck BMD (R2=0.44 and 0.45), cadaver age (R2=0.61 and 0.41) and several structural parameters, e.g., bone volume fraction (R2=0.33 and 0.39, p<0.05 and p<0.01), respectively. To conclude, ultrasound backscatter parameters, measured from intact proximal femurs, are significantly related (p<0.05) to structural properties and mineral density of trabecular bone.

Multi-site bone ultrasound measurements in elderly women with and without previous hip fractures.

UNLABELLED: About 75% of patients suffering from osteoporosis are not diagnosed. This study describes a multi-site bone ultrasound method for osteoporosis diagnostics. In comparison with axial dual energy X-ray absorptiometry (DXA), the ultrasound method showed good diagnostic performance and could discriminate fracture subjects among elderly females. INTRODUCTION: Axial DXA, the gold standard diagnostic method for osteoporosis, predicts fractures only moderately. At present, no reliable diagnostic methods are available at the primary health care level. Here, a multi-site ultrasound method is proposed for osteoporosis diagnostics. METHODS: Thirty elderly women were examined using the ultrasound backscatter measurements in proximal femur, proximal radius, proximal and distal tibia in vivo. First, we predicted the areal bone mineral density (BMD) at femoral neck by ultrasound measurements in tibia combined with specific subject characteristics (density index, DI) and, second, we tested the ability of ultrasound backscatter measurements at proximal femur to discriminate between individuals with previously fractured hips from those without fractures. Areal BMD was determined by axial DXA. RESULTS: Combined ultrasound parameters, cortical thickness at distal and proximal tibia, with age and weight of the subject, provided a significant estimate of BMD(neck) (r = 0.86, p < 0.001, n = 30). When inserted into FRAX (World Health Organization fracture risk assessment tool), the DI indicated the same treatment proposal as the BMD(neck) with 86% sensitivity and 100% specificity. The receiver operating characteristic analyses, with a combination of ultrasound parameters and patient characteristics, discriminated fracture subjects from the controls similarly as the model combining BMD(neck) and patient characteristics. CONCLUSIONS: For the first time, ultrasound backscatter measurements of proximal femur were conducted in vivo. The results indicate that ultrasound parameters, combined with patient characteristics, may provide a means for osteoporosis diagnostics.

Technical and practical improvements in arthroscopic indentation technique for diagnostics of articular cartilage softening.

Indentation measurements have been proposed to serve as sensitive in vivo diagnostics of cartilage degeneration. However, practical difficulties have hindered the use of quantitative indentation techniques during routine arthroscopies. In this study we modified the previously commercial indentation technique by designing software for quality control of manual indentations. With the modifications, our aim was to introduce more rapid and less erroneous measurements, as well as more automatic and objective analyses. The performance of the technique was tested in situ using six bovine medial tibial plateaus. All measurements were conducted by three operators. The intraoperator reproducibility was reasonable (CV%  = 7.1%) and the interoperator reproducibility was good (intraclass correlation coefficient  = 0.976). Further, the novel technique was tested by a single operator using 10 bovine medial tibial plateaus. The indentation stiffness values determined with the arthroscopic instrument correlated significantly with the dynamic (r = 0.823) and equilibrium (r = 0.752) moduli as well as tissue water (r =  -0.830) and hydroxyproline (r = 0.776) contents. To conclude, the novel measurement technique showed good reproducibility and was found to give valuable information on cartilage properties. Most importantly, the measurements and analyses were more straightforward and automatic than those introduced in the original indentation approach.

Dual-frequency ultrasound technique minimizes errors induced by soft tissue in ultrasound bone densitometry.

BACKGROUND: Most bone ultrasound devices are designed for through-transmission measurements of the calcaneus. In principle, ultrasound backscattering measurements are possible at more typical fracture sites of the central skeleton. Unfortunately, soft tissue overlying the bones diminishes reliability of these measurements. PURPOSE: To apply the single-transducer dual-frequency ultrasound (DFUS) technique to eliminate the errors induced by soft tissue on the measurements of integrated reflection coefficient (IRC) in human distal femur in vivo. MATERIAL AND METHODS: Ultrasound and dual-energy X-ray absorptiometry (DXA) examinations were conducted on a bodybuilder during a 21-week training and dieting period. RESULTS: Significant changes in quantity and composition of soft tissue took place during the diet. However, DXA measurements showed no significant effects on bone density measurements. The single transducer DFUS technique enabled the determination of local soft-tissue composition, as verified by comparison with the DXA (r=0.91, n=8, p<0.01). Further, the technique eliminated the soft-tissue-induced error from IRC measured for the bone. The uncorrected IRC associated significantly with the change in local soft-tissue composition (r=-0.83, n=8, p<0.05), whereas the corrected IRC values showed no significant dependence (r=-0.30, n=8, p=0.46) on local soft-tissue composition. CONCLUSION: The DFUS technique may significantly enhance the accuracy of clinical ultrasound measurements of bone.

Dual-frequency ultrasound--new pulse-echo technique for bone densitometry.

Quantitative ultrasound has been suggested for screening of osteoporosis. Most commercial ultrasound devices are based on the through-transmission measurement of calcaneus, which is not a typical fracture site. In contrast to through-transmission measurements, reflection and backscattering measurements may be conducted at typical fracture sites such as vertebra and proximal femur. At these regions, soft tissues overlying bones affect reliability of the measurements. In this study, a novel dual-frequency ultrasound (DFUS) pulse-echo technique is introduced for reduction of the errors induced by soft tissues. First, DFUS was validated using elastomer samples. For further validation, human trabecular bone samples (n = 25) covered with heterogeneous soft tissues were measured at frequencies of 2.25 MHz and 5.0 MHz. The DFUS technique reduced (p < 0.01) the mean error induced by soft tissue from 58.6% to -4.9% and from 127.4% to 23.8% in broadband ultrasound backscattering and integrated reflection coefficient (at 5.0 MHz), respectively. To conclude, the DFUS, being the first ultrasound technique capable of determination of the composition and thickness of the soft tissue overlying the bone, may enhance the accuracy of clinical ultrasound measurements. Thereby, DFUS shows a significant clinical potential.

Spatial variation of acoustic properties is related with mechanical properties of trabecular bone.

In clinical applications, ultrasound parameters are measured as an average value over a region of interest (ROI) or as a value at a single measurement point. Due to natural adaptation to loading conditions, trabecular bone is structurally, compositionally and mechanically heterogeneous and anisotropic. Thus, spatial variation of ultrasound parameters within ROI may contain valuable information on the mechanical integrity of trabecular bone. However, this issue has not been thoroughly investigated. In the present study, we aimed at investigating the significance of the spatial variation of ultrasound parameters for the prediction of mechanical properties of human trabecular bone. For this aim, parametric maps of apparent integrated backscattering (AIB), integrated reflection coefficient (IRC), speed of sound (SOS), average attenuation (AA) and normalized broadband ultrasound attenuation (nBUA) were calculated for femoral and tibial bone cylinders (n = 19-20). Further, the effect of time window length on the AIB, variation of AIB within ROI and association between AIB and bone mechanical properties were characterized. Based on linear correlation analysis, spatial variation of AIB, assessed as standard deviation of measurements within ROI, was a strong predictor of bone ultimate strength (r = -0.82, n = 19, p < 0.01). Further, the time window length affected absolute values of AIB and strength of correlation between AIB and bone ultimate strength. Interestingly, linear combination of mean IRC and spatial variation of AIB within ROI was the strongest predictor of bone ultimate strength (r = 0.92, n = 19, p < 0.01). In conclusion, our findings suggest that the measurement of two-dimensional parametric maps of ultrasound parameters could yield information on bone status not extractable from single point measurements. This highlights the potential of parametric imaging in osteoporosis diagnostics.

Acoustic properties of trabecular bone--relationships to tissue composition.

In osteoporosis, changes in tissue composition and structure reduce bone strength and expose it to fractures. The current primary diagnostic technique, i.e., dual energy X-ray absorptiometry, measures areal bone mineral density (BMD) but provides no direct information on trabecular structure or organic composition. Although still poorly characterized, ultrasound techniques may bring about information on bone composition and structure. In this study, relationships of 2.25-MHz ultrasound speed, attenuation, reflection and backscattering with composition of human trabecular bone (n=26) were characterized experimentally, as well as by using numerical analyses. We also determined composition of the trabecular sample (fat and water content, bone volume fraction) and that of the calcified matrix (mineral, proteoglycan and collagen content of trabeculae). In experimental analyses, bone volume fraction and mineral content of the calcified matrix were the only determinants of BMD. Further, bone volume fraction served as the strongest determinant of ultrasound parameters (r=0.51-0.87). In numerical simulations, density and mechanical properties of the calcified matrix systematically affected ultrasound speed, attenuation, reflection and backscattering. However, partial correlation coefficients revealed only low associations(|r|